Vehicles
143 not categorized PORSCHE 924 GT RACING CARSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.997352108A1 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$1,300.20
Make a selection 997352107A1 All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.
$762.30
Make a selection 99750555792 This is a genuine 997.2 GT3 Porsche motorsports cup spoiler lip. It is a cost-effective replacement for the original GT3 spoilers. It also improves front end downforce. Please be aware that it is lower than the original Porsche spoiler but is far more pliable and more curb friendly. This part is shipped in a smaller box by motorsports to conserve on shipping costs. It is manufactured in polyurethane, so it has memory. Once you receive it just lay it out in the sun for an few hours or slowly and carefully warm it up with a heat gun. Please note: all motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangea...(choose a part on the right to read more) General Fitment911 GT3 2007-11
$229.00
Make a selection 99751293190 On the 997.1 GT3 / rs, air gets diffused and creates lots of turbulence. This genuine motorsport cup ram air spoiler, reduces turbulence and channels more air into the intake above 65 mph. All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions. General Fitment911 GT3 2007-11
From $415.80
Make a selection A1019 The girodisc system is a direct replacement for the oe disc on all 996 GT2/gt3's. No modifications are necessary. The disc will bolt directly to the car and work with oe calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your abs efficiency. The girodisc front rotors are approx 21.0 lbs vs. 25.6 lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response. General Fitment911 TURBO/GT2 2001-05911 1998-05
$1,620.00
Make a selection A1126 The girodisc system is a direct replacement for the oe disc on all 997.2 GT3/gt2's, with or without the OEM pccb rotors. No modifications are necessary, allows use of factory unmodified pads unlike most aftermarket solutions for this application. The disc will bolt directly to the car and work with oe calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your abs efficiency. General Fitment911 TURBO/GT2 2007-09911 GT3 2007-11 911 TURBO/GT2 2010-13
$2,160.00
Make a selection AP996200 Racing is part of every Porsche owner's desire. Going fast is one thing, but giving your car the best handling possible is where you will excel as a driver. Agency power industries has developed these adjustable control arms for your Porsche 996 and 997 vehicle. These control arms fit on the rear of your car and help in adjusting camber and toe. In additional to being fully adjustable, these control arms offer increased rigidity from the replacement of the factory urethane bushing with spherical bearing ends. The 6061 cnc machined arms are anodized in our beautiful brilliant blue color and notched for easy adjustment. Each spherical bearing has cnc machined stainless steel fittings for a secure and safe fit. C...(choose a part on the right to read more) General Fitment911 1998-05911 TURBO/GT2 2001-05 911 GT3 2003-05 911 2005-08 911 GT3 2007-11
$625.95
Make a selection AP996TT155 One of the most important upgrades for the Porsche 996, Cayenne turbo or panamera turbo is to replace the factory Bosch diverter valves. The factory valves are prone to leaking pressure under increased boost when the car has an upgraded ecu flash. As well, the factory Bosch valves will taper boost off with the diaphragm design even at stock boost levels. To help keep the boost pressure constant all the way to redline, upgrading the stock diverter valves to the agency power racing diverter valve kit will improve your cars overall performance. General Fitment911 TURBO/GT2 2001-05CAYENNE 2007-10 CAYENNE 2003-06
$275.95
Make a selection BAT006 Many pre. 1977 Porsche 911's are not equipped with factory oil plumbing (hard lines and thermostat). In this case fitting an oil cooler requires making a hose run from the rear to the front of the vehicle and back. We find the easiest and most cost effective method of plumbing is to duplicate the factory plumbing route using aeroquip hose and fittings with a mocal oil thermostat and oil cooler. The various kits that we offer to accomplish this task include; one of a number of oil cooler options (some are suitable for both fender or front spoiler location), mocal -12 an oil thermostat with mounting bracket, 30 foot length of aqp -12 an stainless braid 3/4" id hose, 30mm metric to -12 an adaptors for the oil ta...(choose a part on the right to read more) General Fitment911 1974-77911 1965-69 911 1970-73
$1,179.45
Make a selection BAT003 Many pre. 1977 Porsche 911's are not equipped with factory oil plumbing (hard lines and thermostat). In this case fitting an oil cooler requires making a hose run from the rear to the front of the vehicle and back. We find the easiest and most cost effective method of plumbing is to duplicate the factory plumbing route using aeroquip hose and fittings with a mocal oil thermostat and oil cooler. The various kits that we offer to accomplish this task include; one of a number of oil cooler options (some are suitable for both fender or front spoiler location), mocal -12 an oil thermostat with mounting bracket, 30 foot length of aqp -12 an stainless braid 3/4" id hose, 30mm metric to -12 an adaptors for the oil ta...(choose a part on the right to read more) General Fitment911 1974-77911 1965-69 911 1970-73
$985.00
Make a selection BES96405000S1 This muffler produces a glorious flat six race car with low deep tones that reminds us of the 964 cup. It is manufactured in Germany by m&m exhaust, gmbh. This muffler is ideal for anyone who wants a lower deeper tone with more decibels, whether they are just replacing the side muffler or are running cat bypass, sport cats or a cup pipe. + 14 hp (10 kw) & + 15 tq (20 nm) gain. - 2 3/4 tubing (70mm). - weighs 13.8 lbs (6.3 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - absolutely no drone in the cabin. - does not interfere with emissions. - includes factory style hangars and new aero quip style clamps for simple installation. We recommend replacing your exhaust tip with this u...(choose a part on the right to read more)
$1,438.80
Make a selection BES98706000S Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade, titanium. Features: dual round 3.5" (90 mm) motorsport grade titanium lightweight 2.73 lbs (1.24 kg) includes clamps for complete installation fills the factory bumper cut out perfectly direct bolt on replacement pre-heated for coloration made in Germany the FVD brom...(choose a part on the right to read more) General FitmentBOXSTER 2009-11
From $1,564.20
Make a selection BES99104060S + 11 hp & + 10 tq gain. - 2 3/4 tubing (70mm). - weighs 35.2 lbs (16 kgs) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - does not interfere with emissions and will not trigger the check engine light. - includes block off plates & caps to use with either the OEM center muffler or an aftermarket center muffler bypass (with 2 inlets). - replaces the OEM valved side mufflers. Connects to OEM header and catalytic flange and connects to OEM center muffler or bypass. - can be used with bes99107060s1 for an even more aggressive growl. * please note - you will no longer have use of your valves ! Our 991 GT3 side muffler replacements are vastly different than the baffle plated mufflers stu...(choose a part on the right to read more)
$1,788.60
Make a selection BES99110200SK "brombacher" stainless steel exhaust system with valves for the 991 + 25 hp & + 20 tq gain. - 200 cell hjs "hd" sport catalysts. - 25 lb. Weight savings over OEM system (weighs 59 lbs. (27,0 kg), OEM weighs 84 lbs. (38kg). - 2 3/4 tubing (70mm). - 4 x 3.5 (90mm) round tips. - motorsport merge collector. - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - absolutely no drone in the cabin. - "aero quip" style motorsport connections without gaskets or flanges to ensure a leak free exhaust. - does not interfere with emissions and will not trigger the check engine light. - ecu programming (software) is not necessary. - under load (moving) with valves closed: 85db* - under load (movin...(choose a part on the right to read more)
$10,030.90
Make a selection AP997TT108 As you step up the power level on your 997 turbo, having proper cooling efficiency is mandatory to maximize your turbo performance. Street and track cars will heavily benefit from the use of our upgraded intercoolers. The factory Porsche intercooler core is great, but their end tanks are what is lacking. Agency power has developed these complete intercooler replacements for your Porsche 997 turbo. Some modifications are required to the intercooler frame and vehicle for fitment. General Fitment911 TURBO/GT2 2001-05
$1,749.95
Make a selection BES99300241S The ultimate stainless steel system for the street. Completely civilized while cruising and opens at higher rpms. Quieter than the street / clubsport versions. More low and mid-range torque. Larger primaries, larger collector, largest diameter tubing on the market. Made for mid-range and top end performance with the added beauty of 3.5" (90mm) dual exhaust tips! + 25 crank hp & +24 crank torque (on average). - 2.9 tubing (75 mm) at the widest point. Primaries are 2.5" (64mm). - 200 cell hjs "hf" trimetallic catalytic converters. - t 316 lightweight stainless steel for improved durability over t 304. - 3.5" (90 mm) dual oval, double walled polished tips included. - intoxicating growl at idle, partial thrott...(choose a part on the right to read more) General Fitment911 1994-98
From $10,723.61
Make a selection BES99126010S Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade, t 316 stainless steel material. Features: polished stainless steel double walled to dissipate heat so discoloration will take longer to appear / easier to polish out includes clamps for installation fits the factory cut outs in the bumper perfectly can be adjusted for...(choose a part on the right to read more)
$600.60
Make a selection BES99126010SOL Our exhaust products are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. Our entire "brombacher" line of exhausts is manufactured by m&m exhaust, gmbh in Germany who is no stranger to Porsche racing exhausts. Each is tested comprehensively for flow rate, thermal stress, resistance to cracking, and longevity. To further ensure quality, m&m use lightweight, motorsports grade, t 316 stainless steel material. Features: polished stainless steel double walled to dissipate heat so discoloration will take longer to appear / easier to polish out includes clamps for installation fits the factory cut outs in the bumper perfectly can be adjusted for...(choose a part on the right to read more)
$660.00
Make a selection BES99709260SRS Brombacher racing exhaust system for 997gt3/rs General Fitment911 GT3 2007-11
$6,996.00
Make a selection BES99709060S90 Brombacher racing exhaust system for 997gt3/rs with 90mm x 2 round tips General Fitment911 GT3 2007-11
From $4,331.80
Make a selection BES99709260SHD Brombacher racing exhaust system for 997gt3/rs General Fitment911 GT3 2007-11
From $4,665.10
Make a selection BES99710200S8HD - equal length headers with long tube design General Fitment911 2005-08
From $8,686.70
Make a selection BK147248 Born in the bohemian town of maffersdorf on september 3, 1875, ferdinand Porsche displayed unparalleled automotive engineering genius from his earliest years. Following stellar work at austro-daimler, as well as with his own engineering firm, he formed his own automobile company after world war ii, developing a line of sports cars which culminated in the fabled 911, the ultimate expression of Porsche’s original vision for the perfect sports car. General FitmentACCESSORY
$45.95
Make a selection CAR2SS100 Since the mid 80's cargraphic has been developing, testing and producing exhaust systems made from the highest grade premium stainless steel. Cargraphic is a specialist supplier for various car company's, high-end tuning and racing teams throughout the world and they thrive off their own development, testing and production departments. Cargraphic's main production line in the south-west of england is fully equipped with modern machinery along with a highly qualified workforce, who together work hand in hand with their German partners. They are committed solely to select materials of the highest standards for a sublime optical-finish and an unmistakeable sound. General Fitment930 1975-77
$1,774.58
Make a selection CAR1SS85 Since the mid 80's cargraphic has been developing, testing and producing exhaust systems made from the highest grade premium stainless steel. Cargraphic is a specialist supplier for various car company's, high-end tuning and racing teams throughout the world and they thrive off their own development, testing and production departments. Cargraphic's main production line in the south-west of england is fully equipped with modern machinery along with a highly qualified workforce, who together work hand in hand with their German partners. They are committed solely to select materials of the highest standards for a sublime optical-finish and an unmistakeable sound. General Fitment930 1975-77
$1,150.88
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |